Honeywell HRG4X User Manual page 116

116 | HRG Performance Series DVR User Guide
3.
4.
5.
6.
To update via an FTP server:
1.
2.
3.
4.
5.
6.
www.honeywellvideo.com
Figure 12-11 Firmware Update Menu
Select the Local Upgrade tab.
Select the firmware on the USB device.
Click Upgrade to begin the update process.
After the system firmware has been updated, reboot the DVR to complete the upgrade
process.
Configure the PC (running the FTP server) and the HRG DVR to be in the same Local Area
Network (LAN). Run the third-party TFTP software on the PC and then copy the firmware to
the root directory of TFTP.

Click Menu Maintenance
Select the FTP tab (see
Figure
Figure 12-12 FTP Firmware Update
Input the FTP server address.
Click Upgrade to begin the update process.
After the system firmware has been updated, reboot the HRG DVR to complete the update
process.

Upgrade to enter the Firmware Update menu.
12-12).