INTRODUCTION This manual illustrates the stand with roller extension tables assembled to a Delta DC-380 15″ Planer. The accessory heavy-duty steel planer stand not only gives a stable support surface for the 15″ planer, but is equipped with two roller extension tables that provide added work support and prevent sniping of the wood when planing longer workpieces.
ASSEMBLING STAND 1. Assemble the two longer support brackets (A) Fig. 4, one of which is shown, to the inside of end panels (B) with eight 5/16-18 x 3/4″ carriage head screws (C), flat washers, and 5/16-18 hex nuts. DO NOT COMPLETELY TIGHTEN HARDWARE AT THIS TIME.
ASSEMBLING SUPPORT BRACKETS TO ROLLER EXTENSION TABLES 1. Place extension table (A) Fig. 7, on a firm supporting surface. Align ends of support assembly (B) Fig. 7, with slotted holes (C) at both sides of extension table (A), and fasten support bracket assembly to extension table with two 1/4-20 x 3/4″...
Page 5
(B) and move the table support inward away from clip (A), while lowering extension table (G). 7. Fig. 14, illustrates the stand with roller extension tables assembled to a Delta 15″ DC-380 Planer. Fig. 14...
Delta Building Trades and Home Shop Machinery Two Year Limited Warranty Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material,...