Belkin 54g User Manual page 48

USING THE WEB-BASED ADVANCED USER INTERFACE
Turbo Mode
Turbo mode is enabled by default. It allows the Router or Access Point to use
frame bursting to deliver the maximum throughput, 2 times faster than any
standard 802.11g equipment, to 802.11g clients. This measurement is based on
aggregate throughput in a mixed 802.11b and 802.11g environment. Belkin
802.11g clients with the latest driver will support Turbo mode. Clients that do
not support Turbo mode will operate normally with it enabled. To switch Turbo
mode off, select "OFF" from the drop-down menu and click "Apply Changes".
(1)
(1)
46