Table of Contents
Advertisement
4.2 Printer Function
1. Select the PC interface connected with bar code printer.
2. Click the "Function" button to setting.
3. The detail functions in the Printer Function Group are listed as below.
Factory Default
Dump Text
Configuration Page Print printer configuration.
RTC Setup
Calibrate Sensor
Reset Printer
Print Test Page
Ignore AUTO.BAS
Ethernet Setup
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start
guide in the CD disk \ Utilities directory.
(Calibrate sensor, Ethernet setup, RTC setup...)
Function
Initialize the printer and restore the settings to factory default.
To activate the printer dump mode.
Synchronize printer Real Time Clock with PC.
Calibrate the sensor specified in the Printer Setup group media
sensor field.
Reboot the printer.
Print a test page.
Ignore the downloaded AUTO.BAS program.
Setup the IP address, subnet mask, gateway for the on board
Ethernet.
Page
63
Description
of 73
Hide quick links:
Advertisement
Table of Contents
