Table of Contents
Advertisement
OPERATOR'S MANUAL
26cc MightyLite Blower
UT08520/UT08921
Your blower has been engineered and manufactured to Homelite's high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for buying a Homelite product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Advertisement
Table of Contents
Related Manuals for Homelite MightyLite UT08921
Summary of Contents for Homelite MightyLite UT08921
- Page 1 OPERATOR’S MANUAL 26cc MightyLite Blower UT08520/UT08921 Your blower has been engineered and manufactured to Homelite’s high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction ... 2 General Safety Rules ... 3 Specific Safety Rules ... 3 Symbols ... 4-5 Features ... 6-7 Assembly ... 7-8 Operation ... 9-11 Maintenance ... 12-13 Troubleshooting ... 14 ... -
Page 3: General Safety Rules
Always disconnect the spark plug before performing maintenance or accessing any movable parts. Do not point the blower nozzle in the direction of people or pets. Never run the unit without the proper equipment attached. Always ensure the blower tubes are installed. -
Page 4: Symbols
SyMBOL NAME Safety Alert Read The Operator’s Manual Eye and Hearing Protection Long Hair Blower Tubes Loose Clothing Gasoline and Lubricant SyMBOLS dESIGNATION/EXPLANATION Precautions that involve your safety. To reduce the risk of injury, user must read and understand operator’s manual before using this product. -
Page 5: Symbols
If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Homelite customer service for assistance. Page ... -
Page 6: Features
PROdUCT SPECIFICATIONS Weight ... 7.9 lbs. Engine displacement ...26cc Air Velocity: MPH ...170 CFM ...375 ThRoTTle/SToP leveR PRimeR bulb FEATURES handle STaRTeR GRiP bloweR Tube Page fuel caP choke dial Fig. 1... -
Page 7: Assembly
KNOW yOUR BLOWER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. - Page 8 ASSEMBLING THE BLOWER TUBE See Figure . Align the flat side of the blower tube with the flat side of the blower. NOTE: Homelite logo will be face up. Push blower tube into blower housing until the tube latch snaps into place.
-
Page 9: Operation
Recommended fuel: This engine is certified to operate on unleaded gasoline intended for automotive use. Mix Homelite Premium Exact Mix lubricant with gasoline according to the instructions on the package. If Premium Exact Mix lubricant is not available, use a high quality synthetic 2-cycle engine lubricant, mixed at 2.6 oz. -
Page 10: Starting And Stopping
STARTING ANd STOPPING See Figures - . Starting the product differs depending on whether the engine is cold or warm. Blower should be on a flat, bare surface for starting. TO START A COLd ENGINE: Place the throttle/stop lever in the high speed ( position. -
Page 11: Operation
Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away. Use the full blower nozzle extension so the air stream can work close to the ground. After using blowers or other equipment, CLEAN UP! Dispose of debris in trash receptacles. -
Page 12: Maintenance
WARNING: When servicing, use only identical Homelite replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. - Page 13 Please contact the nearest service dealer for servicing your spark arrestor. WARNING: Never run the blower without the spark arrestor in place. Failure to do so could result in a fire that could cause serious personal injury.
-
Page 14: Troubleshooting
Contact a servicing dealer. If primer bulb fills, engine may be flooded, proceed to next item. Remove spark plug, turn blower so spark plug hole is aimed at the ground. Rotate the choke dial to “RUN” position and pull starter cord 10 to 15 times. -
Page 15: Warranty
HOMELITE brand product. Proof of purchase will be required by the dealer to substantiate any warranty claim. All warranty work must be performed by a Homelite authorized service center. - Page 16 U.S. EPA standards for the first two years of engine use from the date of sale to the ultimate purchaser. Homelite Consumer Products, Inc., must warrant the emission control system on your non-road or small off-road engine for the period of time listed above provided there has been no abuse, neglect, or improper maintenance of your non-road or small off-road engine.
- Page 17 3 in. x 5 in. card or standard postcard: your name, mailing address, phone numbers, email address, Homelite product(s) purchased with item number from package, and serial number for each product. Mail the card to: Homelite Consumer Products, Attn. Homelite Registration, 1428 Pearman Dairy Road, Anderson, SC 29625.To receive information on our company and products, please include the following statement on your...
- Page 18 1-800-242-4672. Replacement parts can also be obtained at one of our Authorized Service Centers. • HOW TO LOCATE AN AUTHORIZED SERVICE CENTER: Authorized Service Centers can be located online at www.homelite.com or by calling 1-800-242-4672. • HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT: To obtain Customer or Technical Support please contact us at 1-800-242-4672.