DeLonghi FAN HEATER Owner's Instruction Manual page 6

4) PROGRAMMING THE ELECTRONIC TIMER
The timer allows you to set 2 programs in a 24 hour period.
1. Press the button "
The yellow timer ON lamp will light up.
2. Set the start time for your program by pressing the "hour button" to set the hour (AM and
PM) and the "min" button to set the minutes.
3. To select how long you require the heater to be on, push button "
edly until your chosen operating timespan appears. The time periods you are able to
choose from are :15', 30', 45', 1hr, 2hr, 4hr (max).
AM AUTO
O
starting time program A
4. To programme the a second time period (program B) press the "
and proceed as above.
(Note: The operating period must be the same as in program A, if the operating time is
changed eg. from 45 mins to 1hr, both programs will operate for 1 hr).
5. Now set the comfort temperature as previously described by using the thermostat dial.
The power level will automatically be set to maximum and will reduce to the lower
power levels as required.
The heater will switch on automatically every day at the preset time for the designated
time period and will automatically maintain the selected comfort temperature. If you wish
to cancel a program press the "
tons until the display shows:
6
AUTO" (fig. 2), to accesss the 1st programme (programme A).
AM AUTO MAN
°F
O
/
AM AUTO
O
starting time program B
AUTO" button and then the "hour" and "min" but-
O
TIMER ON
yellow light
Fig. 2
" and push repeat-
AUTO
°F
operation time
AUTO" button twice