Electric Connection; Installation - DeLonghi Fan heater Owner's Instruction

GB 13-04-2001 15:39 Pagina 3
signs overheating or deformations are evidenced by the plug. Do not use the recepta-
cle and CALL your electrician.
19. Check that neither the appliance nor the power cable have been damaged in any way
during transportation.
20. CAUTION: to prevent electric shock match wide blade of plug to wide slot, fully insert.
21. Do not cover the appliance while it is functioning in order to avoid overheating with the
attendant risk of fire.
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
CAUTION
- Always use the heater in an upright position.
- Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles
(danger of overheating).
- The appliance must be installed so that the switches and other controls cannot be rea-
ched from a person standing in a bathtub or a shower.
- The electrical feed cord must be replaced only by officially authorised personnel.

ELECTRIC CONNECTION

The fan heater must be connected to a properly polarized A/C 110/120 V household out-
let in perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from the wall outlet
where the heater is plugged in.
When you plug in the appliance, the red pilot light will illuminate (Fig. 1).

INSTALLATION

The fan heater can be easily positioned on any horizontal support surface in an upright
position.
FAN HEATER CONTROLS
"O" Switch
SAVE THESE INSTRUCTIONS
:
Thermostat
"OO" Switch
Fig. 1
3