Dell PowerConnect 8024 User Configuration Manual page 1051

Command
ipv6 nd ra-interval
maximum minimum
ipv6 nd ra-lifetime
seconds
ipv6 nd suppress-ra
ipv6 nd dad attempts
value
ipv6 nd ns-interval
milliseconds
ipv6 nd other-config-
flag
ipv6 nd managed-
config-flag
ipv6 nd reachable-
milliseconds
time
size
ipv6 mtu
ipv6 unreachables
CTRL + Z
Purpose
Set the transmission interval between router advertisements.
maximum
• — The maximum interval duration (Range:
4–1800 seconds).
minimum
• — The minimum interval duration (Range: 3 –
(0.75 * maximum) seconds).
Set the value that is placed in the Router Lifetime field of
the router advertisements sent from the interface.
seconds
The value must be zero, or it must be an integer
between the value of the router advertisement transmission
interval and 9000 seconds. A value of zero means this router
is not to be used as the default router. (Range: 0-9000).
Suppress router advertisement transmission on an interface.
Set the number of duplicate address detection probes
transmitted while doing neighbor discovery.
value
The range for
Set the interval between router advertisements for advertised
neighbor solicitations. The range is 1000 to 4294967295
milliseconds.
other stateful configuration
Set the
advertisements sent from the interface.
managed address configuration
Set the
advertisements. When the value is true, end nodes use
DHCPv6. When the value is false, end nodes automatically
configure addresses.
Set the router advertisement time to consider a neighbor
reachable after neighbor discovery confirmation.
(VLAN interfaces only) Set the IPv6 Maximum
Transmission Unit (MTU) on a routing interface. The IPv6
MTU is the size of the largest IPv6 packet that can be
transmitted on the interface without fragmentation. The
range is 1280–1500 bytes.
(VLAN interfaces only) Allow the interface to send ICMPv6
Destination Unreachable messages.
Exit to Privileged EXEC mode.
is 0–600.
flag in router
Configuring IPv6 Routing
flag in router
1051