Switching The Coffee Machine On And Off - Miele CVA 6401 Operating And Installation Instructions

Switching on
When the machine is switched on it
heats up and rinses out the pipework.
This cleans and heats the pipework in
preparation for making coffee.
If the coffee machine still has an
operating temperature higher than
60 °C, then rinsing will not take
place.
^ Touch the On/Off sensor
Tip: If you do not want the water from
the rinsing process to flow into the drip
tray, place a suitable container, e.g. the
small container supplied, underneath
the central spout before making the first
coffee of the day.
At first "Heating-up phase" will appear
in the display and once the coffee
machine has heated up, "Appliance
rinsing" will appear. Hot water will be
dispensed from the central spout.
You can now make drinks.

Switching the coffee machine on and off

.
Switching off
^ Touch the On/Off sensor
If coffee has been dispensed, the
coffee machine will rinse the coffee
pipework automatically before
switching off.
Switching off for longer
periods of time
If the machine is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ Empty the drip tray, the waste
container and the water container.
^ Clean all components thoroughly,
including the brew unit, the central
spout connector and the drip catcher
in the machine front.
^ Switch off the machine.
If you are leaving the front open while
the coffee machine is not in being
used for a long time, disconnect it
from the mains to save energy.
.
23