Dhcp Table Screen; Figure 137 Dhcp Table; Table 83 Dhcp Table - ZyXEL Communications Prestige 661H Series User Manual

Table 82 System Status: Show Statistics (continued)
LABEL
Poll Interval(s)
Set Interval
Stop

21.3 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP
configuration for the clients. If set to None, DHCP service will be disabled and you must have
another DHCP server on your LAN, or else the computer must be manually configured.
Click Maintenance, and then the DHCP Table tab. Read-only information here relates to
your DHCP status. The DHCP table shows current DHCP Client information (including IP
Address, Host Name and MAC Address) of all network clients using the DHCP server.

Figure 137 DHCP Table

The following table describes the fields in this screen.

Table 83 DHCP Table

LABEL
Host Name
IP Address
MAC Address This field displays the MAC (Media Access Control) address of the computer with the
Chapter 21 Maintenance
DESCRIPTION
Type the time interval for the browser to refresh system statistics.
Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Click this button to halt the refreshing of the system statistics.
DESCRIPTION
This is the name of the host computer.
This field displays the IP address relative to the Host Name field.
displayed host name.
Every Ethernet device has a unique MAC address. The MAC address is assigned at
the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Prestige 661H/HW Series User's Guide
258