Sony Cyber-shot DSC-TX10 User Manual page 238

Cyber-shot User Guide
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Using with your computer > Connecting the camera to the computer > Deleting the
Deleting the USB connection
Perform the procedures from step 1 to 3 below before:
Disconnecting the cable.
Removing a memory card.
Inserting a memory card into the camera after copying images from the internal memory.
Turning off the camera.
1. Double-click the disconnect icon (
2. Click
(USB Mass Storage Device)
3. Confirm the device on the confirmation window, then click [OK].
Note
Drag and drop the icon of the memory card or the drive icon to the "Trash" icon beforehand
when you use a Macintosh computer, and the camera is disconnected from the computer.
The disconnect icon may not appear when you use a Windows 7 computer. In such a case,
you can disconnect the camera from the computer without following the above steps.
Copyright 2011 Sony Corporation
238
/ ) on the tasktray.
[Stop].
Print
USB connection
Back to top