Main Procedure
No Power
-
Ensure that the power cord and AC power outlet are securely connected.
-
Check Lamp Cover and Interrupt Switch
-
Ensure that all connectors are securely connected and aren' t broken.
-
Check DC-DC
-
Check Ballast
-
Check Main Board
Auto Shut Down
-
Check LED Status
a. Lamp LED light
- Check Lamp
- Check Lamp Driver
- Check Main Board
b. Temp LED Light
- Check Thermal Sensor
- Check Thermal Switch
- Check Fan
c. Color Wheel
- Check color wheel
- Photo sensor
d. No Power
- Refer to "No Power" troubleshooting
No Image
-
Ensure that the signal cables and source are work as well. (If you connect
multiple sources at the same time, use the "Source" button on the control
panel to switch.)
-
Ensure that all connectors are securely connected and aren' t broken.
-
Check Main Board
-
Check DMD Board
-
Check Color Wheel
-
Check DMD Chip
-
Check Engine Module
EP719 / EP716 / EP719R / EP716R /
3-2
EP719P / EP716P