Step 3: Use the bottom side of nipper to push down the tenon to separate elevator.
Step4: Unscrew one screw to remove the top of elevator.
Step5: Push down to separate the body of elevator.
Step 4
step 5
Step 3
2. Remove Rear Cover
Step1: Unscrew six screws
Step2: Pull open from the edge of the rear cover
Step3: Detach rear cover from the bottom side.
(As the picture shows)
Rear Cover
EP719 / EP716 / EP719R / EP716R /
2-4
EP719P / EP716P