Optoma EP720 Family Service Manual page 54

3. Programming
- Key in the serial number into the
barcode blank space.
- In "Write Source Select," make a check
in "VGA1".
- Click "Program."
4. Change the cable to VGA1
- Message box appears on the screen,
then click "OK."
5. When the EDID program is completed,
a message "OK" will appear on the screen.
6. Read EDID "Analog" information
- In the Read item,select "Analog"and
"Trans",then click the "Read" button.
7. EDID Informations will appear
.
EP720 Family/EP726 Family
Confidential
6-4