Disassembly Process; Equipment Needed & Product Overview - Optoma EP720 Family Service Manual

Chapter 2

Disassembly Process

2-1 Equipment Needed & Product Overview
1. Screw Bit (+) :105
2. Screw Bit (+) :107
3. Screw Bit (-) :107
4. Hex Sleeves 5 mm
5. Tweezers
6. EP726 projector
* Before you start: This process is protective level II. Operators should wear electrostatic chains.
* Note: - If you need to replace the main board, you have to get into service mode and record the
lamp usage hour.
-The disassembly process for EP720 Family/EP726 Family is the same. Here, we take EP726 as an
example.
EP720 Family/EP726 Family
Confidential
2-