Table of Contents
Advertisement
Barracuda 36ES Product Manual, Rev. H
9.6.4.2
Mating connectors for W and LW model drives
The nonshielded cable connector shall be a 68 conductor connector consisting of two rows of 34 male contacts
with adjacent contacts 0.050 inch (1.27 mm) apart.
Recommended mating flat cable connector part numbers are:
Amp Model 786096-7
Amp Model 786090-7
Amp Model 749925-5
Amp Model 88-5870-294-5 W/O Strain Relief (25 mil conductor centers, 30 AWG wire).
Amp Model 1-480420-0
Berg 69307-012
[1]
See Figure 27.
The drive device connector is a nonshielded 68 conductor connector consisting of two rows of 34 female pins
with adjacent pins 50 mils apart. The connector is keyed by means of its shape (see Figure 26).
. 155
.050
.100
(2.54)
.050
.218
(1.27)
(5.54)
Pos. 68
.980
(24.89)
Figure 26.
Nonshielded 68 pin SCSI device connector used on W and LW drives
Female, 68-pin, panel mount
Female, 68-pin, cable mount
(50 mil conductor centers, 28 or 30 AWG wire)
Use two, 34 conductor, 50 mil center flat cable with this connector.
This type connector can only be used on cable ends. [1]
Use either on cable ends or in cable middle section for daisy-chain
installations [1].
Power connector 4 circuit housing
12-position, 2 x 6, 2 mm receptacle housing
1.650
.022
1.816
(46.13)
Position 1
Pos. 35
1.650
(41.91)
1.368
(37.74)
3.650±.005
.346
.270
.3937
.0787
.020
.519
(13.18)
Pos.
.315
1
(8.00)
4
.0787
Pos.
(2.00)
2
.767
(19.48)
3.650
(92.71)
.600
.200
.047
.60
(15.24)
.20
typ
(5.08)
.085
Pos.
x 45¡ chamfer
(2.16)
1
typ
3
2
1
.315 ± .010
(8.00)
+.001
.840 ± .005
.083
Ð.002
(21.34)
(2.1)
Trifurcated Pins
(4 places)
69
dia
Advertisement
Table of Contents
