Samsung SND-6011R User Manual page 85

Table of Contents

Advertisement

to make recording on the micro SD memory
1. Check the memory card's <free> size and <total> size.
2. If there are sufficient free space, set the device to <on>.
Otherwise, check the stored data and if you find them not important, then click
<format> to format the Micro SD memory.
Some frames may be skipped if the micro SD memory card operates at the lower speed than
`
recommended.
For more details, refer to "Recommended Micro SD/SDHC/SDXC Memory Card Specifications".
(Page 11)
For a Micro SD memory card with a large capacity, the formatting will be slowed down accordingly.
`
The data traffic will increase when the camera is set to higher resolution, higher bit rate, and/or higher
`
framerate.
If there is too much data traffic, some frame may be skipped although it is stored in a full frame.
3. Specify the storage action.
• Record profile : Shows recording profile's codec type.
• Overwrite : If the Micro SD memory is full, this will delete old data and store new
data in replacement.
• Pre-alarm duration : Specify the time point before the occurrence of the alarm;
starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the alarm.
• Post-alarm duration : Specify the time point after the occurrence of the alarm; to
the specified time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the alarm.
• Record file type : It specifies the file format of the recorded images.
- STW : It is Samsung Techwin's unique file format.
- AVI : It is the conventional avi format.
• Normal : Make recording at a certain frame rate.
• Event : Set the recording type for a certain event that occurs.
4. Specify the <normal record setup>.
• Always : Always save recorded video in the Micro SD memory card.
If set to Always, the activation time cannot be changed.
`
• Only scheduled time : Records only on the specified time of the specified day of week.
• [Clear (
)] : Reset all settings.
5. When done, click [apply (
)].
English _85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sno-6011r

Table of Contents