Samsung SND-6011R User Manual page 19

installation
1. Attach the installation template to the
selected area and punch 3 holes as shown in
the figure.
2. Use the 2 supplied screws to fix the camera
to the 2 punched holes.
Set the <FRONT TOP> mark imprinted on the
`
camera to face the direction of camera monitoring.
3. Connect the camera internal terminal with the
corresponding cable.
4. Adjust the lens in a desired direction by
referring to the "adjusting the monitoring
direction for the camera" section. (page 22)
We recommend you not to touch the lens as the
`
J
camera lens has been properly focused in the
final process of manufacturing. If so, the lens may be out of focus or stained by alien substances.
5. Fasten the dome case (dome cover + camera case)
to the main body as shown in the figure.
Pay attention to the direction for assembly.
`
J
6. Use one hand to hold the camera's bottom part and
turn the cover counterclockwise with another hand.
English _19