Warnings and Precautions CAUTION: To prevent electric shock, match wide blade WARNING: Shock hazard - Do Not Open. of plug to wide slot and fully insert into power outlet. AVERTISSEMENT: Risque de choc électirque - ne pas ouvrir. WARNING: To reduce the risk of fire or electric shock, Use only the main AC/DC power cord and adapter that do not expose this apparatus to rain or moisture.
Important Safety Instructions Read these Instructions. FCC Warnings Keep these Instructions. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the Heed all Warnings. user’s authority to operate the equipment. Follow all instructions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Do not use this apparatus near water.
Unboxing Your 13.3” LED HDTV + DVD Includes Note: • Remote control and 2 AAA batteries Some pixels may be visible on the screen, appearing • Removable stand as tiny red, green, blue or black spots. This is normal • AC/DC Power Supply and is not a defect on the TV nor does it negatively affect the performance.
Orientation TV TOP CONTROLS SETUP Eject Play/ Volume ± Channel± Setup Source Power Pause TV REAR INPUTS TV SIDE USB Port SD/MMC/ DVD/CD AC Power Plug Composite Stereo MS Card Player to DC input Video Input Headphone Jack Reader HDMI Input Composite Digital Audio Input...
REMOTE Source Power Press and use the Arrow/Enter Press to power the television off or on. buttons to adjust the source. Favorites In TV mode, press to view Display your favorites list. Press to view the on-screen display. Freeze Aspect Press to freeze or unfreeze the Press to adjust the aspect ratio current frame in TV mode.
Connecting Devices to Your TV Connecting a TV Antenna You will need: a antenna/cable wire (not included). 1. Connect the Antenna wire to the input on the television. 2. Press the Source button to switch to TV mode. 3. Press the Setup button to access the setup menu. 4.
Connecting Devices to Your TV Connecting Composite Audio/Video You will need: composite (yellow) and RCA stereo (red,white) cables (not included). 1. Connect the device’s audio and video outputs to the corresponding audio and video inputs on the television. 2. Power the television on and press the Source button to switch to the connected input AV Composite. Connecting a Computer You will need: a PC with a VGA output, and a VGA cable (not included).
DVD and CD Playing a DVD or CD 1. Insert a DVD or CD into the slot-load disc drive, with the label side of the DVD or CD facing the rear of the television. Once a DVD or CD is loaded into the television, the TV will automatically switch to DVD mode 2.
USB and SD, MMC, MS Memory Card Using a USB Thumb Drive 1. Load a USB thumb drive into the USB Port as shown in the image to the right. 2. Press the Source button to switch to USB mode. 3.
Settings Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the Source button to switch to TV mode. 2. Press the Setup button to access the setup menu. 3.
Mounting to a Wall Specifications • 100mm x 100mm spacing (ht. x wth.) • M4 bolt pattern and thread pitch A 10 to 15mm long bolt is recommended, depending on the thickness of the wall bracket selected. 3.93” (100 mm) WE STRONGLY RECOMMEND HAVING THIS TELEVISION MOUNTED PROFESSIONALLY.
Contact Information are made with up to 85% recycled material. In Website: www.gpx.com addition to material consideration, DPI, Inc. has also Email Support: prodinfo@dpiinc.com focused on the finer details that positively impact Email Parts: partsinfo@dpiinc.com...