Remote Control Operating Range - Optoma EP7155i Service Manual

Delta Elec. Inc.
1 (Brightness)
19.
2 (Menu)
20.
Keystone +/-
21.
◄ (Source)
22.
┘
23. ◄ (Enter arrow)
L (Left)
24.
Left
25.
Enter
26.
Power
27.
Laser
28.
Note:
The remote control can only interface with a computer when connected to the computer
through a USB cable connection. The computer cable connects a computer to the projector for
display purposes only.

Remote Control Operating Range

The remote control uses infrared transmission to control the projector. It is not necessary to
point the remote directly at the projector. Provided you are not holding the remote
perpendicular to the sides or the rear of the projector, the remote will function well within a
radius of about 7 meters (23 feet) and 15 degrees above or below the projector level.
Company Confidential
11
EP7155i & EP1691i
Brightness menu
Opens the OSD
Corrects image-trapezoid (wider top/bottom) effect
Navigates and changes settings in the OSD
Input source selection when OSD Off
Changes settings in the OSD
L key for emulation of USB mouse left click via USB
Left arrow when connected through USB to a PC
Enter key when connected through USB to a PC
Turns the projector On or Off
Use as on-screen pointer. DO NOT POINT IN EYES.
Optoma_______________________ Delta____________
2010/01/11