NordicTrack NTL61011.0 User Manual page 11

8. With the help of a second person, hold the con-
sole assembly near the Left Handrail (71) and
the Right Handrail (not shown).
Connect the Upright Wire (70) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
9. Set the console assembly on the Left and Right
Handrails (71, 72). Make sure that no wires
are pinched. Insert the excess Upright Wire
(70) into the Left Handrail.
Attach the console assembly to the brackets
on the Handrails (71, 72) with two 5/16" x 1"
Screws (7) and two 5/16" Star Washers (8).
Start both Screws, and then tighten them.
8
Console
Wire
70
9
72
8
7
11
Console
Assembly
Console
Wire
70
71
Wire
Tie
Console
Assembly
87
70
71
8
7