Harman Kardon AVR240 Service Manual page 8

AVR240 harman/kardon
FRONT-PANEL CONTROLS
operation, this line will show current input source and
which analog or digital input is in use. When the tuner is
the input, this line will identify the station as AM or FM
and show the frequency and preset number, if any.
ı Lower Display Line: Depending on the unit's sta-
tus, a variety of messages will appear here. In normal
operation, the current surround mode will show here.
ˆ Surround Mode Indicators: The current selected
surround mode will appear as one of these indicators.
Note that when the unit is turned on, the entire list of
available modes will light briefly, and then revert to
normal operation with only the active mode indicator
illuminated.
NOTE: When the Dolby Virtual Speaker or Dolby
Headphone modes are in use, no Surround Mode
Indicator R will light. However, the surround mode
name will scroll in the Lower Display Line Q.
˜ Remote Sensor Window: The sensor behind
this window receives infrared signals from the remote
control. Aim the remote at this area and do not block
or cover it.
8 FRONT-PANEL CONTROLS 7 7