Troubleshooting
There is no power
• If using the UHF-18 DIAMOND as a plug-in module, make sure the connector cable is firmly attached .
• Make sure the UHF-18 DIAMOND is turned on by turning the Power/Volume knob clockwise .
• Make sure all of your components are turned on .
• When using the UHF-18 DIAMOND as a stand alone unit, make sure the power adapter is plugged in .
There is no sound
• Make sure everything is connected firmly and properly .
• Make sure all of your components are turned on .
• Make sure the mic is switched on, and not switched to mute .
• Adjust the volume knob on the wireless module .
• Make sure the microphone batteries are charged and installed correctly .
15