Differential Oil
1.
Park the ATV on level ground.
2.
Place an oil drain pan under the oil drain plug ( ).
3.
Remove the oil filler cap ( ), drain plug and sealing washer ( ).
4.
After the oil has completely drained, reinstall the drain plug with a
new sealing washer and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5.
Fill the differential with the recommended oil.
6.3 US oz (185 cm )
Make sure the oil level is at the lower edge of the oil filler inspection
hole ( ).
4
6.
Install the oil filler cap.
FRONT
(4)
(1) oil drain plug
(2) oil filler cap
Servicing Your Honda
158
2
(3) sealing washer
(4) oil filler inspection hole
1
3
(1)
(3)
(2)