Checking & Adding Oil
Refer to
Saf ety Precautions
Check the engine oil level each day before operating your ATV and add
if needed.
Bef ore checking the engine oil level
1.
Park your ATV on a firm, level surface.
2.
Remove the dipstick ( ) from the oil tank and wipe it clean.
3.
Insert the dipstick without screwing it in, then remove the dipstick and
check the oil level.
If the oil level is above the tip mark ( ), install the dipstick and
proceed to the oil level check.
If the oil does not stick to the dipstick or the oil level is below the tip
mark, do not start the engine.
Before starting the engine, remove the oil filler cap ( ) and add the
specified oil into the filler cap hole, up to the lower level mark ( ) on
the dipstick. Do not over fill.
Reinstall the oil filler cap and dipstick.
Proceed to the oil level check.
RIGHT SIDE
(1) dipstick
(2) tip mark
on page
1
(3)
Engine Oil & Filter
131
.
2
(1)
(3) oil filler cap
(4) lower level mark
Servicing Your Honda
3
4
(4)
(2)
(cont'd)
149