Setting The Receiver's Channel - First Alert A-560 User Manual

Setting Up Your A-560 System
Model A-560 User's Manual
S R
ETTING THE ECEIVER
The wireless receiver is capable of receiving up to four separate channels. The front of the
wireless receiver has four LEDs corresponding to the four channels. When lit, the LED
indicates which channel is currently being displayed.
On the back of the receiver, flip the dip switch corresponding to the channel of the
connected camera to the ON position.
The wireless receiver allows you to switch manually between active channels by pushing
the SET button. Each time the SET button is pushed, the receiver changes to the next
channel (CH1 to CH2 to CH3 to CH4, and back to CH1).
camera channel LEDs
' C
S HANNEL
SET button
9
channel switches
use 'L' switch to scan between
channels
camera antenna