Adjusting The Coffee Grinder - DeLonghi EAM 4000 B Operating Instructions Manual

When using the machine for the first time, 4-5 cups of coffee need to
be made before the machine starts to give satisfying results.
When an alarm light comes on to signal an anomaly, do not contact the
service centre straight away. The problems can almost always be resolved
by following the instructions indicated in paragraphs 12 and 13. If neces-
sary, contact the customer service by calling the number listed on the sheet
enclosed on page 2.
If your country is not listed on the sheet, call the number indicated on
the warranty.

6 ADJUSTING THE COFFEE GRINDER

The coffee grinder must not be adjusted, at least initially, as it has already
been pre-set in the factory for the correct delivery of the coffee.
Nonetheless, after having made the first coffees, if delivery is too fast or
too slow (in drops), the grinding coarseness must be adjusted using the
knob (Fig.17) located inside the bean container. Turning one click (one
number) clockwise achieves faster delivery of the coffee (without drops).
Turning one click anticlockwise achieves slower delivery and makes the
coffee creamier in appearance.
These adjustments will only be evident after the delivery of at least 2 cups
of coffee.
The grinding coarseness adjustment knob must only be turned when the
coffee grinder is on.
NOTE 1: The machine has been tested in
the factory using coffee and therefore it is
completely normal to find some traces of
coffee in the grinder.
The machine is in any case guaranteed to be
new.
Turn anticlockwise for finer ground coffee
and consequently slower delivery and a
creamier appearance.
Turn clockwise for coarser ground coffee
and consequently faster delivery (not a
drop at a time).
Fig.17
OPERATING INSTRUCTIONS
27
GB
Fig.13
Fig.14
Fig.15
Fig.16