Belt Cleaner Release Sensor Pcb Assy - Brother DCP-9045CDN Service Manual

8.28 Belt Cleaner Release Sensor PCB ASSY

(1) Release the two Hooks to remove the Belt cleaner release ASSY from the Middle plate.
(2) Turn the Belt cleaner release ASSY upside down. Remove the bind B M3x8 Taptite screw,
and then remove the SOL PCB sheet and Belt cleaner release sensor PCB ASSY.
Belt cleaner release ASSY
Fig. 3-188
Taptite, bind B M3X8
Fig. 3-189
3-138
Middle plate
<Front>
Hook
Hook
SOL PCB sheet
Belt cleaner release sensor PCB ASSY
<Bottom of case>
Belt cleaner release case
Confidential