Table of Contents
Advertisement
4.4.7
APM Configuration
This sub-menu allows you to change Advanced Power Management (APM)
features. Select an item then press <Enter> to display the configuration
options.
Advanced
APM Configuration
Restore On AC Power Loss
Resume by PS/2 Keyboard
Resume by PS/2 Mouse
Resume by Ring
Resume by PME#
Resume by RTC
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system will reboot after an AC power
loss. When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume By PS/2 Keyboard [Enabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Resume By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Resume By Ring [Disabled]
When set to [Enabled], the system will generate a wake event when the
external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
4-28
BIOS SETUP UTILITY
[Power Off]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
→←
Select Screen
↑↓
Select Item
+-
Change Field
Tab
Select Field
F1
General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS setup
Advertisement
Table of Contents
