To Select A Contact From The Phonebook; To Delete A Contact (Name/Phone Number); Using The Remote Controller; To Switch Conversation Media - JVC KD-A725 Instructions Manual

•
14
To select a contact from the phonebook
fll
Select PHONEBOOK calling method.
(page 12)
l~J
Press
Ji../T
to show the search menu
(A to Z, 0 to 9, and OTHERS).
"OTHERS" appears if the 1st character is not
A to Z, or 0 to 9, such as #, -,
I,
and etc.
W
Press
Ji../T
to select your desired
character, then press the control dial to
confirm.
The name list of the selected character
appears.
f4l
Turn the control dial to select your
desired contact, then press to confirm.
• Only the existing characters will be shown on
the search menu.
• Press and hold
Ji..l~
to continuously change
the character of the search menu.
• If your phonebook contains many contacts,
searching take some time.
To delete a contact (name/phone number)
Only when "PB IN UNIT" is selected for
"P. BOOK SEL". (page 13)
[1]
Press FUNC. to enter "Hands-Free" screen.
l1l
Display the list of name/phone numbers
using one of the calling methods.
(page 12)
[JJ
Turn the control dial to select the name/
phone number you want to delete.
[}] Press and hold BACK to enter the
"Delete Entries" screen.
[[] Turn the control dial to select "DELETE" or
"DELETE ALL."
• If "DELETE" is selected, the selected name/
phone number in step
W
is deleted.
If "DELETE ALL" is selected, the listed
numbers in step
l1J
selection are deleted.
[§]
Press the control dial to confirm.
Receiving/ending a phone call
When a call comes in, the source is
automatically changed to "BT FRONT/ BT REAR."
• "RECEIVING" appears for a while, then the
phone number or name appears
• The display will flash in blue. ("RING COLOR,"
page 13)
ENGLISH
When <AUTO ANSWER> is activated....
The unit answers the incoming calls
automatically.
· Press FUNC. or the control dial to answer
the incoming call when <AUTO ANSWER> is
deactivated.
During a phone call conversation ...
• Turn the control dial to adjust the phone
volume level (00 - 50). [Initial: VOLUME 15
J
The adjustment made will not affect the other
sources.
• Press
Ji../T
to adjust the microphone
sensitivity (01 - 03). (As the number increases,
the microphone becomes more sensitive.)
• Press
I~V /~~A
to turn on/off the
Noise Reduction and Echo Cancelation mode.
To end an incoming call, press and hold
FUNC. or the control dial.
Using the remote controller
Ji../T / .....
/~/SOURCE:
[Press] Answers calls.
[Hold] Rejects calls.
To switch conversation media (the unitl
mobile phone)
Press the control dial during a phone call
conversation, then continue your conversation
using the other media.
· Operations may be different according to the
connected Bluetooth device.
To switch between two connected mobile
phones
When two mobile phones are connected to
the unit, you can access to both "Hands-Free"
screens.
Press FUNC. to access to the 1st phone's
"Hands-Free" screen, press again to access to
the 2nd phone's "Hands-Free" screen.
• To return to the 1st phone's "Hands-Free"
screen, press BACK.
Arriving of a text message
When a text message comes in, the unit rings
if your mobile phone is compatible with text
message and "MSG NOTICE" is set to "ON".
(page 13)
• You cannot read, edit or send a message
through the unit.