Displaying Bluetooth Setup Screen; Bluetooth Setup Menu Items; Setting Up Bluetooth - Kenwood DDX790 Instruction Manual

Setting up Bluetooth

You can perform general operations such as connection and initialization through <Bluetooth
Setup> on the <Setup> menu.
Displaying the <Bluetooth Setup> screen
1
On <Top Menu>:
2
<Bluetooth Setup> menu items
Menu items Selectable setting/item
Paired Device Press [Enter] to show the list of the registered devices. You can connect the
List device or delete the registration (
PIN Code Changes the PIN code of the unit.
• Enter a new PIN code, then press [Enter].
Device Name Shows the device name to be shown on the Bluetooth device —
"KENWOOD BT MM-7U2. "
Device Address Shows the device address of the unit.
Auto Connect ♦ ON
♦ OFF
Bluetooth HF/ Select the speakers used for Bluetooth (both phone and audio player).
♦ Front Only
Audio
♦ All
♦ ON
Auto Pairing
♦ OFF
Initialize Hold [Enter] to initialize all settings you have made for using Bluetooth
mobile phone and Bluetooth audio player.
58
English
3
page 57).
: The connection is automatically established with the last
connected Bluetooth device when the unit is turned on.
: Cancels.
: From front speakers only.
: From all speakers.
: Establishes the pairing automatically with the connected
iOS device (such as iPhone) even if the Bluetooth function
is deactivated on the device. (Auto pairing may not work
for some devices depending on the iOS version.)
: Cancels.
Initial: Underlined