Kenwood DDX790 Instruction Manual page 35

Using the Replay function
You can temporarily record the broadcast
from the current time, and replay the
recorded data.
• When the recording capacity is full,
the older recorded data is deleted and
recording continues.
• If you change to another channel during
playback, the recorded content will be lost.
Entering the Replay mode
Progress bar
Time code
Playback status
(3: play / 8: pause )
Progress Shows the remaining capacity
bar (gray) and the amount of
recorded data (blue). If you
have already recorded fully,
the entire bar is indicated in
blue.
• Updated every second.
Time code Shows you the point of Replay
you are listening to.
• Example: –5:00
You are listening to the data
of 5 minutes before the
current broadcast.
• Updated every second.
[4] • Returns to the previous
track if pressed within
2 seconds from the
beginning of the current
track.
• Returns to the beginning of
the current track if pressed
after 2 seconds or more
of the track have been
replayed.
[1] [¡] Rewind/Fast forward
[38] Starts/Pauses playback.
[¢] Skips the current track.
Exiting the Replay mode (Returning to
the channel reception screen)
35
English