Call Charge Display - Siemens HiPath 3000 User Manual

Making calls – enhanced functions
Step by Step
> <
Do Not Disturb OFF?
> <
Service?
> <
* 65=Show call charg-
es?
72
[
Select the menu item and confirm.
a Press the on-hook key several times to end the opera-
tion.

Call charge display

After a call has ended, the display shows the connec-
tion charges for the current call as standard. If the costs
are to be displayed continuously during an outgoing call,
this function must be requested from the carrier.
You can check and display the call charges for your
phone number as a total for a period that can be set by
the service engineer.
First the call charges for the last charged call are dis-
played. The total call charges are displayed after five
seconds.
This function can also be called by entering the code
Page 132
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
a Press the on-hook key several times to end the opera-
tion.
Note:
If a call is transferred, the costs are assigned to
the telephone to which the call was transferred
from this point onwards.
Page 132.