Setting The Date And Time - Siemens HiPath 3000 User Manual

Step by Step
u v
Ï
Settings
s t
Date/Time

Setting the date and time

Set the time and date so that the correct time and date
are assigned to incoming calls and to use the alarm
clock.
The handset date and time are automatically set when
you set up a call to another station. If your communica-
tion system does not support this function, you can set
the date and time manually.
either:
v
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
or: If the date and time have not yet been set:
Press the display key.
Time
then:
o
Enter the date, for example, 22/09/2007 = 220907 .
s
Move the cursor down one line.
o
Enter the time, for example, 19:05 = 1905.
Save the settings.
Save
Note:
If your communication system does not auto-
matically set the date and time, you must check
the setting from time to time and if necessary,
correct it.
Setting up the handset
31