AE00972
ENGINE OIL REPLACEMENT
Avoid draining the engine oil immediately after
stopping the engine. The oil is hot and should be
handled with care to avoid burns.
1. Place the generator on a level surface and warm
2. Remove the oil filler cap.
1
3. Place an oil pan under the engine. Remove the oil
2
4
4. Check the oil drain bolt, gasket, oil filler cap and
3
700-109a
1 Oil filler cap
2 O-ring
3 Oil drain bolt
4 Gasket
5. Install the oil drain bolt.
Oil drain bolt torque:
6. Add engine oil to the upper level.
1 Upper level
1
700-006a
WARNING
up the engine for several minutes.
Then stop the engine.
drain bolt so that the oil can be completely
drained.
O-ring. If damaged, replace.
17 Nm (1.7 m·kgf, 12 ft·lbf)
– 26 –