NEC L102W User Manual page 55

Appendices
Power Indicator
Indicator Condition
Off
Blinking light Blue
Steady light Blue
Red
Status Indicator
Indicator Condition
Off
Blinking light Red
Steady light Red
LIGHT Indicator
Indicator Condition
Off
Blinking light Red
English ... 48
Problem: Indicator lighting message
Projector Condition
The main power is off
0.5 sec On, The projector is getting ready to turn on.
0.5 sec Off
2.5 sec On, Off Timer is enabled.
0.5 sec Off
The projector is turned on.
The projector is in standby.
Projector Condition
Normal
1 cycle (0.5 sec light source error
On, 0.5 sec Off)
2 cycle (0.5 sec Temperature error
On, 0.5 sec Off)
4 cycle (0.5 sec Fan error
On, 0.5 sec Off)
Control Panel Lock is enabled.
Projector Condition
Normal
LED light source fails to light.
Note
--
Wait for a moment.
--
--
--
Note
--
Light source fails to light. Wait for a moment.
The projector is overheated. Move the projector to a
cooler location.
Fans will not work correctly. Contact your dealer.
To disable Control Panel Lock, see page 35.
Note
--
Try to turn on the projector again. If the problem still
remains unsolved, contact your dealer.