Main Unit Inspection - HTC Blackstone Service Manual

Doc. Title

6.3 Main unit inspection

Cosmetic inspection generic spec.:
1. Exposure of substratum is not acceptable for peeling. (Area 4 is included)If not exposure of substratum,
please check by SPEC of dot or scratch. (Area 4 is not included)
2. Logo may not have blurred or double print., the peeling on logo is not acceptable.
3. The character printing of main unit does not allow bad printing, scratch, dirty,
lacquered peeling, dark/white dot on it)
4 .Camera Lens: Contamination dot / foreign matter
≦
D 0.25mm, S 3mm
5. Accessories include Cradle; please follow Class B for inspection.
6. Main unit cosmetic inspection criteria of class D, please follow dummy class C for
inspection criteria.
GAP & STEP INSPECTIONS
Description
Status of main unit assembly
Gap between each key and ME
parts
Gap between all generic ME
parts
Gap between Touch Window and
A parts
Step between mating parts
The inspective point of D area:
1. Any marks generated by scratching, grinding or colliding are acceptable except base material exposed
2. Not allow battery connector deform. The hook of battery cover also can't allow broken and deform
HTC CONFIDENTIAL
HTC Corporation
.
Blackstone Service Manual
≧ ；Lint: L 1.5mm , W 0.2mm ≦
Defective assembly and deformed shape were not
allowed
Can't stuck up or no click feeling, It couldn't
allow stuck up at pressing process
Gap between all generic ME parts < 0.3 mm
Gap between Touch Window and A parts
< 0.35 mm
Stylus assembly protruding, loose, missing, falling
Stylus
and deformed are not allowed
Step between all generic ME parts < 0.2 mm.
Reverse step do not accept
Doc. No.
Issued Date
Revised Date
≦ 。
Accept criteria
DOC-00045694
2008/8/21
2008/11/6
Page 75 of 96
Level
Minor
Minor
Minor
Minor
Minor
Minor
SM-TP001-0704
REV.
A01