5.
Press buttons to verify function. Indica-
tors will toggle on (or off) and beep tone
will sound when buttons are pressed.
NOTE: Pressing SOIL LEVEL, SPIN
SPEED, WATER LEVEL or LOAD SIZE,
and WASH/RINSE TEMP will cause all in-
dicators above these buttons to toggle on
(or off) at one time.
If any of the following occur during steps, see
TEST #4:
•
None of the indicators light up
•
No beep sound is heard
•
Some buttons do not light indicators
DEACTIVATION OF DIAGNOSTIC
TEST MODE
Press the STOP or POWER button at any
time to exit Automatic, Manual, or Console &
Indicators diagnostic test modes.
6-8