Tv Stand Installation - RCA LED46A55R120Q User Manual

TV Stand Installation

TV LED46A55R120Q is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out
the installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the
panel from being damaged.
The panel can be scratched easily, so please:
1. Choose an absolutely flat surface to place the TV on.
2. Use soft cloth or cushion to face the TV panel.
Do not put TV on the table directly.
Always unplug the AC cord first when installing/removing
the stand.
Step Two
Take the neck. Please align the screw holes of the neck and the
TV, and then insert the 6 machine screws into the 6 holes on
the neck and tighten them.
Pedestal Screws
M4 x 10mm
Step Three
Take the base. Please align six holes of the base and six
screwholes of the neck, insert the base to the neck, and then
insert the 6 tapping screws and tighten them.
The bottom view of the TV
( Front cabinet faces down)
Pedestal Screws Quantity
M4 x 10mm
Quantity Part #
6pcs RS01TM410H
Part #
6pcs RS01TB410H
9