Important to user FCC Statement NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority. NOTE: This equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 of the FCC Rules.
Important Safety Precautions Safeguards The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important...
Page 4
Important Safety Precautions Safeguards 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, when liquid has been spilled or when objects have fallen into the apparatus, or when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Page 5
Important Safety Precautions Safeguards 20. OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 21. OUTDOOR USE: Do not install this TV outdoor. If the TV is exposed to rain, it may result in a fire or an electric shock.
Table of Contents Table of Contents 1.Important to user... 2.Important safety precautions... Safeguards... Safety Strap..3.Table of Contents... 4.Setting Up... Installing the Stand... Wall mount specifications... Wall mount..TV Front... TV Rear... Connect to other devices... 5.Using the Remote Control... Installing the remote control batteries...
Setting Up Installing the Stand/Wall mount specifications Installing the Stand 1. Lay a cloth or another soft material on a flat surface to avoid damage to the LCD screen. 2. Put the TV back upward and the LCD screen downward and keep it flat on the table-board. 3.
Setting Up Wall mount Wall mount When Installing the TV Against a Wall or Enclosed Area Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 45° F (5 ) Instand with stand Install on the wall 4 inches...
Setting Up TV Front Model Number LED42A55RS LED4755ARS Note:Touch the silk print area according to the need, the TV will response correctly. Blue The light is off when TV is turned on.
Setting Up TV Rear TV Rear COMPONENT2 SERVICE VIDEO COAXIAL HDMI 4 The cable tie is only used for the power cord. Note: The appearance of LED42A55RS,LED47A55RS are similar, the picture above is for reference only.
- Connect a Video RCA cable to an appropriate external A/V device such as a VCR, DVD or Camcorder. - Connect RCA audio cables to “R -AUDIO - L” on your set and the other ends to corresponding audio out connectors on the A/V device.
Page 14
Setting Up Connect to other devices 3. Connecting Component Devices (DVD, DVR (digital video recorder), Blu-Ray) Component video(Y, Pb, Pr)transmits video as separate Y, Pb, Pr signals. Use this connection for high-definition video signals from a DVD or other equipment. - Connect Component video and audio cables to Component inputs (“PR/CR”, “PB/CB”, “Y”) of your set and the other ends to corresponding component video out connectors on the PVR or DVD.
Page 15
Setting Up Connect to other devices 5. Connect to PC - Connect the D- Sub cable to “VGA” on the side of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable to “PC AUDIO ” on the side of your set and the other end to “Audio Out”...
Using the Remote Control Installing batteries Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the “+” and “-” signs on the batteries to the signs on the battery compartment. 3.
Using the Remote Control Learning about the remote control panel Remote Control Panel Buttons instructions (1) Power On/Off. (2) Power indicator. (3) INPUT: Switch among TV, Video, Component, HDMI and VGA. (4) 0-9 Numbers: For direct channel access. (5) Last: Return to previous channel. (6) —...
Using the Remote Control Quick starts Basic Operation Connecting power cord to the TV 1. Connect the power cord to the connector on the back of the TV, if the power cord in accessories. Note:When connecting the power cord to the connector of the TV, make sure the power cord is fully inserted in the place.
Page 19
Using the Remote Control Quick starts Use [EXIT] button Press the [EXIT] button to exit the OSD menu. Select channels by numbers To select a channel: Press the channel number you would like to go to. For example, to select channel number 120, press buttons 1, 2 and 0, respectively and then press [ENTER] to confirm.
Appendix Specifications Model Screen Diagonal Size Screen Resolution Power Consumption Wall-mount screws pattern Wall-mount dimension(VESA) Size with base(inch)(L X WX H) Weight with base(lbs) Power Supply AC 60Hz 120V Television System American TV standard NTSC / ATSC system BTSC system Audio multiplex VHF: 2~13 Channel coverage...