Table of Contents
Advertisement
the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E: :
Follow the steps from on page 82.
(Battery level warning)
Slow flashing
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions, may flash, even if there
are about 20 minutes remaining.
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
(High temperature warning)
Slow flashing
The temperature of your camcorder is getting
higher. Turn off your camcorder and leave it
for a while in a cool place.
Fast flashing
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
(Warning indicator pertaining to
memory card)
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 21.
No memory card is inserted (p. 21).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 56), delete unnecessary images, or
format the memory card (p. 78).
The image data base file may be damaged.
GB
88
Check the data base file by touching
(MENU) [Show others]
[REPAIR IMG.DB F.] (under
MEDIA] category) the recording medium.
The memory card is damaged.
(Warning indicators pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 78).
(Warning indicator pertaining to
incompatible memory card)
Incompatible memory card is inserted (p. 21).
(Warning indicator pertaining to
the write-protect of the memory card)
Access to the memory card was restricted on
another device.
You are using the memory card with the write-
protect switch, and the switch is set to the
LOCK position.
(Warning indicator pertaining to
camera-shake warning)
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to
photo recording)
The recording media is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
(Warning indicator pertaining to smile
shutter)
The smile shutter cannot be used with the
current setting of the camcorder.
[MANAGE
Hide quick links:
Advertisement
Table of Contents
