Installing Your Refrigerator - Haier HB21FC75 User Manual

INSTALLING YOUR REFRIGERATOR

Note: Refrigerator is for freestanding purpose.
Unpacking Your Refrigerator
1. Remove all packaging material. This includes the foam base and all adhesive
tape holding the refrigerator accessories inside and outside.
2. Inspect and remove any remains of packing, tape or printed materials before
powering on the refrigerator.
Proper Air Circulation
designed for, you should install it in a location where there is proper air
circulation, plumbing and electrical connections.
refrigerator:
Sides................1" (25mm)
Top....................1" (25mm)
Back..................1" (25mm)
Electrical Requirements
proper grounding to power the refrigerator.
to accommodate a two-plug outlet. This is a dangerous practice since it
provides no effective grounding for the refrigerator and may result in
shock hazard.
Use of Extension Cord
certain conditions. If it is necessary to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding plug and a 3-slot outlet that will
accept the plug. The marked rating of the extension cord must be equal to, or
greater than, the electrical rating of the appliance.
Install Limitations
e.g. garage etc. Your refrigerator was not designed to operate in temperature
settings below 55˚ Fahrenheit.
from direct sunlight or heat source, e.g. radiators, baseboard heaters, cooking
appliances etc. Any floor unevenness should be corrected with the leveling legs
located on the front bottom corners of the refrigerator.
English
4