Audio Menu; How To Select Audio Mode; How To Customize Your Own Audio Status; Sap Broadcasts Setup - Haier HLC26R1 Owner's Manual

Audio menu

How to select audio mode

1. Press MENU button and then use
menu.
2. Press / ENTER button and then use
Mode.
3. Press /ENTER button to select the option Off, Concert, Living
Room, Hall, Bathroom, Cave, Arena and Church.
You can also press AUDIO button on the remote control to select
the Audio Mode Off, Rock, Pop, Live, Dance, Techno, Classic and
Soft.

How to Customize your own audio status

1 Press MENU button and then use .
menu.
2 Press . /ENTER button and then use
desired items.
3 Press / . ENTER button and then use
setting.
Balance
Adjust to emphasize left or right speaker balance.
Bass
Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
SRS TS XT
To turn the simulated surround sound on and off.
Mode
To adjust the audio mode: Off, Concert, Living Room, Hall,
Bathroom, Cave, Arena and Church.
Equalizer
To adjust the equalizer: Off, Rock, Pop, Live, Dance,
Techno, Classic and Soft.
SPDIF Type
To Adjust the SPDIF output: Off, Dolby Digital and PCM.
AVL(Automatic Volume Control)
This will reduces the differences in volume level among
broadcasters.
Audio Only Press
display will appear on the screen.
If enter Audio Only mode, press "POWER" to exit!
OK
Press to select OK , then press OK to confirm. The TV screen will
be black and no picture , but the sound is still normal.
You can press POWER button to reveal the picture on the screen.

SAP Broadcasts Setup

This TV can receive MTS stereo programs and SAP (Secondary
Audio Program) that accompanies the stereo program; if the
station transmits an additional sound signal as well as the
original one.
When having selected SAP button on the remote control, this TV
can only receive the signal when the TV station transmits the
proper signals.
Mono sound is automatically received if the broadcast is only in
Mono; even though Stereo or SAP has been selected.
Select Mono if you want to listen to mono sound during stereo/
SAP broadcasting. Stereo or SAP can be received in a Analog
channel.
1. Use SAP button to select your desired MTS mode in a analog
signal.
Each time you press SAP button, Mono, Stereo or SAP appear.
If other languages are available on the digital signal, select
them with the SAP button.
2. Press EXIT button to save and return to TV viewing.
/ button to select Audio
/ button to select
/ button to select Audio
/ button to select
/ button to adjust the
/ ENTER button to confirm, the following
Cancel
Video
Balance
Bass
Audio
Treble
SRS TS XT
Channel
Mode
Equalizer
SPDIF Type
Function
AVL
Lock
Audio Only
Audio
ENTER
Operation
0
59
59
On
Off
Off
PCM
Off
Adjust Select EXIT Back
/
Owner s Manual 23