Audio Menu Options; Function; Channel Menu Options - Haier HL Series Owner's Manual

Operation
t
he white areas detail of the picture: On or Off.
CTI: Color transient intensity, to adjust the picture
for cilor errors: Medium/Strong/off/Weak.
Fiesh Tone: To adjust the flash colors: On or Off.
Adaptive Luma Control: To adjust changes in the
luminance of the picture On or Off.

Audio Menu Options

Sound can be adjusted for any input as follows:
A
Press MENU button and then
the following menu appears on the screen.
Video
Balance
Bass
Audio
Treble
Sound Surround
Channel
Mode
Equalizer

Function

AVL
Audio Only
Lock
Audio
B
Press / ENTER button to enter the menu and
/ button to go up and down to select the
desired option.
C
Press / ENTER button to confirm and
/ button increase and decrease the level to
adjust the selected option to your preference.
D
Repeat step 2 and step 3 until desired audio quality
has been achieved.
Function
Balance: Press /
confirm, then press
output between left and right speakers.
Bass :Press / button and
to confirm, then press
decrease the level of the lower-pitched sounds.
Treble :Press / button and
to confirm, then press
decrease the level of the higher-pitched sounds.
Sound surround : To turn the simulated surround
sound on and off.
EN-13 TV LCD-TFT Owner's Manual
/ button until
0
50
50
On
Off
Off
Off
Select
ENTER Adjust Back
/
button and / to
ENTER
/ to adjust the audio
/ button
ENTER
/ to increase or
/
ENTER
/ to increase or
Mode : Press /ENTER button to select the type of
sound which best corresponds to your lightning
requirements by selecting Mode in Audio menu.
Equalizer : To adjust the equalizer Off /Rock /Pop /Live
/Dance/ Techno /Classic/Soft.
AVL : This will reduces the differences in volume level
among broadcasters.
Audio Only : Press /ENTER button to confirm, the
following display will appear on the screen:
Press to select OK, then press OK to confirm. The TV
screen will be black and no picture , but the sound is
still normal.
If enter Audio Only mode, press
OK
You can press POWER button to reveal the picture on
the screen.
SAP Broadcasts Setup
This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound
signal as well as the original one.
When having selected SAP button on the remote
control, this TV can only receive the signal when the TV
station transmits the proper signals.
Mono sound is automatically received if the broadcast
is only in Mono; even though Stereo or SAP has been
selected.
Select Mono if you want to listen to mono sound during
stereo/SAP broadcasting.
Stereo or SAP can be received in a Analog channel.
A
Use the SAP button to select your desired MTS
mode in a analog signal. Each time you press the
SAP button, Mono, Stereoor SAP appear. If other
languages are available on the digital signal, select
them with the SAP button.
B
Press EXIT button to save and return to TV viewing.

Channel Menu Options

Channel menu will appear in main menu only in TV
mode.
A
Press MENU button and
following menu appears on the screen.
POWER to exit!
Cancel
/ button until the