Store Numbers And Names In The Directory -Seess; Store A Pause Or Flash Ina Directory Number - AT&T 950 User Manual

Store numbers and names in the
a directory
©) 1. Press (DIRECTORY), then (OPTIONS). The screen
displays ENTER. HUMBER.
2. Dial the telephone number you want to
store (up to 24 digits).
--- OR ---
Press (REDIAL) to store the last number dialed.
Q NOTE: If the redialed number is longer than 24
digits, you will hear an error tone if you are off
hook while storing the number. The number
cannot be stored.
3. Press (OPTIONS). The screen displays
EHTER HAME.
4. Use the Keypad characters chart on page
23 to enter a name up to 15 characters long.
Use CALL LIST (á) to backspace and CALL
LIST Y to advance or add a space. When you
want to enter two characters in a row which
share a keypad button (for example M and O),
you must press CALL LIST (Y) to move the
cursor to the next position. There is no time
limit for entering the name.
5. Press to store the name and number.
>
_
(e)
z
fc)
z
>
2m
Oo
J
oO
OPTIONS | DIRECTORY,
a NOTE: To exit the directory at any time without
saving changes, press (CLEAR).
Store a pause or flash ina
directory number
Press CALL LIST (Y) twice to store a pause in the dialing
sequence (the screen displays P). Press to store
a press of the flash button (the screen displays F).
saving changes, press (CLEAR).