Opening Lists With The Message Key - Siemens Gigaset C470 IP Manual

Using the directory and lists

Opening lists with the message key

You can use the message key f to open the following lists:
u
Answer machine list (Gigaset C475 IP only)
u
Configuring the network mailbox
If a network mailbox is configured for fast access and the network provider supports this
function (page 87).
u
SMS list, see page 56
If several mailboxes are set up (page 59), several lists will be displayed, if required.
u
Incoming e-mail list, see page 73
The list is only shown if new messages have arrived in the mailbox from the incoming
e-mail server.
u
Calls list
u
Messenger message list, see page 81
The list is only shown on the handset that is online.
An advisory tone sounds as soon as a new message arrives in a list. The f key flashes
(it goes off when the key is pressed). In idle status, the display shows an icon for the new
message:
Icon New message...
Ã
... in answer machine list (Gigaset C475 IP) or on the network mailbox
Á
... in calls list
À
... in the SMS, messenger or e-mail list
The number of new entries is shown beneath the corresponding icon.
List selection
Pressing the f button will only display lists that contain messages (with the exception of
the network Mailbox). Lists with new messages are shown first and identified in bold. The
number of messages received in each are shown in brackets. If a list contains no new mes-
sages, the number of old messages will be shown.
Example:
Messages & Calls
Calls List:
Mailbox
SMS:
Ans M.:
Ý
¤
Select a list with q and press
Please note:
If calls are saved in the network mailbox you will receive a message if the appropriate settings have
been set (see your network provider's network mailbox instructions).
48
VoIPon www.voipon.co.uk
(4)
(2)
(1)
(2)
OK
.
§OK§
sales@voipon.co.uk
Opening lists with the message key
Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299