Focus Mode; Display Zoom - Samsung SNV-3120 User Manual

camera setup

FOCUS MODE

You can set general functions of zoom camera module.
1. Select the <FOCUS MODE>.
2. Select the focusing mode.
 ONEAF : Automatically switches
between MF mode and AF mode.
 MF : Is activated in preset task.
The focus data are saved previously in
each preset. As soon as the camera is
set in the preset location, the corre-
sponding focus data associated with
the preset is called immediately.
 AF : Is activated when starting focus adjustment.
And sets the SENSITIVITY and NIGHT operation mode.

DISPLAY ZOOM

You can select to operate the display zoom or
not.
DETAIL
You can set the SHARPNESS.
The higher the level is, the sharper and clearer
the outline of the image becomes. However,
noise increases accordingly.
V-SYNC
You can select the INT or LINE.
 INT : Synchronizes the output time of the camera with the internal crystal.
 LINE : Synchronizes the output time of the camera with the AC power supply to adjust
the output phase for multiple cameras.

M
If you use the DC12V or PoE power supply, it is fixed to the INTERNAL SYNCH only.
AGC COLOR SUP
Adjusts the color display range based on the level of auto gain control.
52_ camera setup
AF AF
SENSITIVITY SENSITIVITY
NIGHT NIGHT
DAY/NIGHT DAY/NIGHT
WHITE BAL WHITE BAL
FOCUS MODE FOCUS MODE
DISPLAY ZOOM DISPLAY ZOOM
DETAIL DETAIL
V-SYNC V-SYNC
AGC COLOR SUP AGC COLOR SUP
POSI/NEGA POSI/NEGA
DIS DIS
[ [ 5 5 ] ]
MID MID
AUTO AUTO
ONEAF ONEAF
OFF OFF
[2] [2]
(INT)--- (INT)---
MID MID
+ +
OFF OFF