ZyXEL Communications NSA320 User Manual page 358

Chapter 17 Troubleshooting
• The default server name is nsa320, if you have changed the server name,
use the new one.
• If the server name has been changed and you do not know the new server
name, see the troubleshooting suggestions for
NSA.
• If it still doesn't work, try using the NAS Starter Utility.
• Check the hardware connections, and make sure the LEDs are behaving as
expected. See the Quick Start Guide and
• By default, the NSA gets an IP address automatically. The NSA assigns itself an
IP address if no device assigns one. If your computer is also set to get an IP
address automatically, the computer and the NSA can both assign themselves IP
addresses and communicate. See
configure the NSA with a static IP address.
• If you are connecting to the NSA by its IP address, make sure you use the
correct one. If the NSA has a wired Ethernet connection and a wireless
connection through an attached USB wireless dongle, the NSA has a different IP
address for each connection. To connect through the wired Ethernet connection,
use the wired Ethernet connection's IP address. To connect through the wireless
connection, use the wireless connection's IP address.
• Make sure your computer's IP address is in the same subnet as the NSA's IP
address. You can use the NAS Starter Utility to find the NSA's IP address. See
Appendix A on page 383
this if you know that there are routers between your computer and the NSA.
• Ping the NSA from your computer. Make sure your computer's Ethernet adapter
is installed and functioning properly. In a (Windows) computer, click Start, (All)
Programs, Accessories and then Command Prompt. In the Command
Prompt window, type "ping" followed by the NSA's IP address (use the NAS
Starter Utility to find the NSA's IP address if you don't know it) and then press
[ENTER].
• Make sure you are using Internet Explorer 6.0 (and later) or Firefox 1.07 (and
later).
• Make sure your Internet browser does not block pop-up windows and has
JavaScript and Java enabled. See
Explorer 6, you may also have to enable scripting of safe ActiveX controls. See
Section 17.4.1 on page
I forgot the password.
• The default password is 1234.
• If you have changed the password and forgotten it, you will have to reset the
NSA.
358
Section 1.3 on page
Section 8.4 on page 175
for how to change your computer's IP address. Skip
Appendix B on page
359.
I forgot the server name of the
25.
if you need to
397. With Internet
NSA320 User's Guide