Flashing The Bios - Dell Latitude X1 Service Manual

Back to Contents Page
Flashing the BIOS
Dell™ Latitude™ X1 Service Manual
1. Ensure that the AC adapter is plugged in and that the battery is installed properly.
2. Connect an external floppy or CD drive to the computer.
3. Insert the flash BIOS update program floppy disk or CD and turn on the computer.
Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the update is complete, the
computer automatically reboots.
4. Press <F2> during POST to enter the system setup program.
5. Press <Esc>, select Save changes and reboot, and then press <Enter> to save configuration changes.
6. Remove the flash BIOS update program floppy disk or CD from the drive and restart the computer.
Back to Contents Page