Front Panel (Mini Tower Chassis Only); Removing The Front Panel; Replacing The Front Panel - Dell Precision 330 Service Manual

Back to Contents Page
Front Panel (Mini Tower Chassis Only)
Dell Precision™ WorkStation 330 Systems Service Manual
Removing the Front Panel
Replacing the Front Panel

Removing the Front Panel

CAUTION: Before you perform this procedure, see
1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then
2. Release the front panel by pressing the green front-panel release button marked with the icon (see the following figure).
Removing the Front Panel (Mini Tower Chassis)
3. While pressing the front-panel release button, rotate the top of the panel outward, away from the chassis.
4. Lift the panel away from the chassis.

Replacing the Front Panel

Fit the two front-panel retaining hooks into the recessed slots at the bottom of the chassis. See
of the panel toward the chassis until the front-panel latches snap into the tabs on the front panel.
Back to Contents Page
"Precautionary Measures."
"Removing the Front Panel (Mini Tower
remove the computer cover.
Chassis)." Then rotate the top